Select A Function; Set The Range; Using The Secondary Display - Agilent Technologies U3401A Guide De Mise En Route

1 Getting Started
5
6
7
6

Select a function

Press one of the following keys to select a measurement function.

Set the range

For most measurement functions, you can allow the multimeter to
select the range automatically by using the autoranging function, or you
can select a fixed range using manual ranging. The AUTO annunciator is
displayed when the autoranging function is selected.
Selects autoranging and disables manual ranging. Press
to toggle between the manual ranging and autoranging.
Selects a higher range and disable autoranging.
Selects a lower range and disable autoranging.

Using the secondary display

Press followed by a specified function keys such a
, or to enable the secondary display mode.
,
U3401A Quick Start Guide
,