Turbo Cooling Fan; Icematic And Ice Storage Container - Beko CH142100 DS Mode D'emploi

Masquer les pouces Voir aussi pour CH142100 DS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Turbo Cooling Fan

"Turbo cooling fan is designed to
ensure homogenous distribution and
circulation of the cold air inside your
refrigerator. Operation time of the
turbo cooling fan may vary depending
on the properties of your product.
While the turbo fan works only with
the compressor in some products,
the control system determines its
operation time in some products
in accordance with the cooling
requirement. This situation is explained
on a separate warning and information
label attached on the refrigerator in
products equipped with turbo fans
running under different conditions than
the compressor."
Icematic and ice storage
container
Using the Icematic
* Fill the Icematic with water and place
it into its seat. Your ice will be ready
approximately in two hours. Do not
remove the Icematic from its seating to
take ice.
* Turn the knobs on it clockwise by 90
degrees.
Ice cubes in the cells will fall down into
the ice storage container below.
* You may take out the ice storage
container and serve the ice cubes.
* If you wish, you may keep the ice
cubes in the ice storage container.
Ice storage container
Ice storage container is only intended
for accumulating the ice cubes. Do not
put water in it. Otherwise, it will break.
10
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ch146100 dCh142120 dpx

Table des Matières