SilverCrest SBF 5.0 A1 Mode D'emploi page 60

NOTE
► The USB type-A socket
Quick Charge
with Quick Charge
If the connected device is compatible with this charging
standard, it will automatically be detected by the
hands-free set. The hands-free set supplies the ap-
propriate output voltage or output current so that the
device can be charged more quickly. Devices without
this charging standard can be charged normally using
the USB type-A socket
♦ Connect the hands-free set to the cigarette lighter of
your car.
As soon as the display 1 switches on, the hands-free
♦
set is ready for use. Depending on the vehicle type, it is
possible that the ignition has to be switched on first.
♦ Use its original charging cable, connect your external
device to one of the USB sockets 0/q. The charging
process begins automatically.
♦ If required, you can switch your connected device on for
further use.
♦ After charging, disconnect the original charging cable
of your external device from the hands-free set.
SBF 5.0 A1
0 supports the Qualcomm
3.0 charging standard (compatible
TM
2.0 and Quick Charge
TM
0.
1.0).
TM
GB │ IE │
57
®
■