Pairing The Hands-Free Set With A Car Radio - SilverCrest SBF 5.0 A1 Mode D'emploi

Pairing the hands-free set with a car radio

Before you can use the hands-free set, you must pair it with
the car radio.
♦ Select a free FM frequency, in the frequency range from
87.5 to 108.0 MHz, on your car radio. A detailed de-
scription of how to do this is to be found in the operating
instructions for your car radio.
♦ If necessary, save the frequency to a memory space on
your car radio.
♦ Connect the hands-free set to the 12/24 V socket of
your car. This is usually the cigarette lighter (vehicle
socket) on the dashboard of your vehicle.
♦ The message "
followed by the input voltage, e.g. "
supply to the hands-free set is established. " " then
flashes on the display 1.
♦ Select the same frequency on the hands-free set. Press
dial 4 for 2 seconds. Once you let go of the
the
dial 4, the current frequency flashes in the display 1
for up to 3 seconds. Immediately turn the
you get to the frequency shown on the car radio.
The display automatically switches back to " ".
The hands-free set is connected to your car radio.
SBF 5.0 A1
" appears briefly on the display 1
". The power
dial 4 until
GB │ IE │
47 ■