Using The Bassboost Function; Charging External Devices - SilverCrest SBF 5.0 A1 Mode D'emploi

Using the BassBoost function

You can use the BassBoost function to increase the bass
playback.
♦ Press the
BassBoost function. " " is shown on the display.
♦ Press the
BassBoost function. " " is shown on the display.

Charging external devices

CAUTION
► The total power consumption of the devices connect-
ed to the two USB type-A sockets 0/q may not
exceed 4 A. Make sure that the power consumption
of your device is not higher than 3 A when you are
using the USB type-A socket
the USB type-A socket
power consumption of your device is not higher than
1 A. Refer to the instruction manual of your device for
more information.
► The maximum current output of the hands-free set is
4 A. The maximum current output of the USB type-A
socket
the USB type-A socket
│ GB │ IE
■ 56
button 5 once briefly to switch on the
button 5 once briefly to switch off the
0 is 3 A. The maximum current output of
0. If you are using
q, make sure that the
q is 1 A.
SBF 5.0 A1