DA-GEN DRYDEN AQUA GENERATOR Mode D'emploi page 2

DA-GEN
Dryden Aqua Generator
1. DESCRIPTION
The DA-GEN ® is an innovative water treatment system and additional an intelligent pool controller. The DA-
GEN ® combines Hydrolysis with Electrolysis with a low mineral content.
The Hydrolysis produces free radicals and other oxygen compounds like ozone, peroxide and persulfate.
All these oxidants destroy organic substances and pathogens in the water. Free radicals are the strongest
oxidants we know. They oxidise and decompose in a few seconds. To guarantee a safe residual disinfection
®
the DA-GEN produces a very small amount of chlorine. In combination with Dryden DAISY
low mineral content of 1 to 2 kg MgCl
The DA-GEN ® also controls all your pool equipment centrally. Thanks to WiFi you can check and control
your pool system 24/7.
Control panel
4
1
2 3
110-230 V
1 Connection cell
Gas detector connection
2
5
3 Main 230V connection
6
4 ON/OFF switch
Status of the auxiliary relays
Production intensity
in %
Polarity 1 / Polarity 2
Pol 1 Pol 2
If the cover is open the filtration speed is
Cover
"medium" (if with frequency controlled pump)
7.5 pH Setpoint
Function of pH dosing pump
ON/OFF
TANK
Low level pH-Minus bottle
0.50 Free Chlorine Minimum Setpoint
FL 1 Flow alarm (Paddle/Gas) /
FL 2
AL3
Maximum dosing time exceeded
Status of filtration relay
(see chapter 12- Filtration)
man
aut
®
USER MANUAL
or NaCl per m 3 .
2
5
6
4 Amp fuse for panel and cell
4 Amp fuse relays
2. MAIN SCREEN
Wifi signal
Current time
(normally 40-100%)
Flow alarm rotameter Cl
2
(reset the alarm)
Manual
Automatic
Communication display – mother board
®
we need a very
Cell
4
1
5
2
3
---
Flow
Low
ON/OFF
700
AL3
FL 1
Automatic measurements: pH/redoX/
free chlorine/conductivity
Lights
Manual /
man aut
1
1 Cell
2
Gas detector connector
3 Cell connector
Cell housing
4
5
Gas detector (internal)
1 Except DA-GEN 150
Heating ON/OFF
Water temperature
Waiting time
Filtration stopped due to lack of water flow
Lack of conductivity or salt / low water
temperature / scale on cell / exhausted cell
(check working hours)
Additional chlorine pump (optional)
Minimum Redox Setpoint
Maximum dosing time exceeded
(reset the alarm)
Flow alarm
(according to options)
Automatic
TOUCH SCREEN
1
EN