Features - Sony AC-VQL1BP Mode D'emploi

Features

AC-VQL1BP is an AC adaptor/charger that can supply DC power to the Sony external
equipment and be attached and charge the four Sony lithium ion battery packs*.
* This unit can charge a maximum of two battery packs simultaneously (one of each by A slot
and B slot).
(When attaching two battery packs to the slots of the same system simultaneously, this unit
cannot charge the battery packs simultaneously. After charging of the battery pack attached
first is completed, this unit switches to charging of the other battery pack attached to the same
system automatically.)
•For charging lithium ion type battery packs.
You cannot be used to recharge Ni-Cd or Ni-MH type batteries.
•Cannot be used with some models of equipment (camcorder, etc.).
Confirm the compatibility of your equipment before use.
Features
Attaching the maximum four battery packs simultaneously
There are two charging system A and B. This unit can be attached a maximum four battery
packs. Each system charges a battery pack. After the charging is complete, it starts charging the
other battery pack attached to the same system automatically.
Two system DC output terminals
There are two DC output terminal systems A and B. This unit can operate the external
equipment as an AC adaptor. (This unit cannot operate as DC output and charge the battery
pack on the same system.)
Display "BATTERY LOG" and charging information
When attaching the "InfoLITHIUM" battery pack (L series) to this unit, the usage history and
charging condition of the battery pack are displayed.
•Total charging time, total number of charging cycles, the year and month of the last use
•Usable time of the battery pack attached, remaining time until charging will finish
(The indicated values are approximated. The information displayed to charge the battery packs
is limited.)
Effective charging
You can select "full charging" or "normal charging" with charging mode change switch.
If you are in a hurry, set to "normal charge" to finish charging one of the battery pack when
normal charging is completed and start charging another battery pack.
If the battery pack that has charged fully, this unit indicates that charging is completed without
charging the battery pack.
Self-check function
When trouble has occurred with a battery pack or this unit, a warning will be indicated in the
display window.
For details, refer to "Charging the battery pack" (p. 18).
GB
13
-GB