Beko CEG 3192 B Mode D'emploi page 15

5
Operation
5.4 Adjusting The Volume of Your Coffee/Hot Water
You can save your desired volume of coffee for both strong espresso and mild espresso and also the hot
water from 25ml to 250ml.
When making your coffee (either strong
espresso or mild espresso) press and
hold the button you selected. The app-
liance will continue to make the cup of
coffee while holding on the button.
To reset to the default/factory settings;
In order to reset to the default settings of coffee and hot water volume selection recorded in memory, it
is necessary to reset to the factory settings.
1. When the device is off, remove the inner and outer drip pans,
2. Remove the service cover,
3. Remove the carafe,
4. Place the service cover,
5. Press down the on-off key for 5 seconds (It beeps 2 times)
6. Open the service cover,
7. Place the carafe,
8. Close the service cover,
9. Place the drip tray.
It has been resetted to factory settings.
Fully Automatic Coffee Machine / User Manual
2x
beep!
When the volume of coffee meets your
desired volume, release the button. If
you hear two beeps, that indicates the
machine has saved the volume of coffee
that you prefer.
15 / EN