Assembly; Operating Instructions - Fanelite X01A-DC Mode D'emploi Et Notice De Montage

4. ASSEMBLY

WARNING : Before assembling your appliance, carefully read the safety instructions
in this manual.
1. Assemble the rear base (8) and the front base (5), making sure that the power cord (6) is
properly positioned in the center of the two bases.
2. Secure the assembly of the base with the fan by inserting and screwing the screws under
the base (16).
3. Secure the power cord below the base (15) with the small plastic part.

5. OPERATING INSTRUCTIONS

WARNING : Before using your appliance, carefully read the safety instructions in this
manual.
Control panel overview Remote control overview
Plug in the power cord. Then using the control panel or remote control (requires 2 AAA
batteries, see section REPLACING THE BATTERIES for more information) :
Power ON/OFF
Press the ON/OFF button to turn on or turn off your fan.
Speed setting
Press the SPEED button to adjust the speed (5 speeds) :
1. Low speed 3. Medium speed 5. High speed
The corresponding LED on the control panel to the speed selected will light
up.
Timer
You can set the timer by pressing the TIMER button so that the fan turns off automatically
after the selected time has been reached.
Press the TIMER button to set the timer, up to 7 hours.
Each time the button is pressed the timer increases by one hour.
The corresponding LED on the control panel will light up, indicating the selected
time.
16