Sensor Placement; Installation And Start-Up; Ventilation Guards - Vestfrost ULTF-37i Notice D'utilisation

12 12 Vestfrostsolutions.com Vestfrostsolutions.com

Sensor placement

1
2
EN
1.
TR3 – Regulating probe.
2.
External sensor – Use a 3.5mm cable tie
to mount external sensor.
The cable tie can be found in the plastic
bag.
EN

INSTALLATION AND START-UP

Ventilation guards

Vestfrost Solutions Vestfrost Solutions 13 13
The two ventilation guards are mounted
before moving the appliance to it's final
placement.
The guards function is to secure an absolute
minimum of ventilation, if the appliance is
pushed too close up against a wall.
Steps:
1.
Mount the ventilation guards in the holes
on the backcover.