Symbols On The Device; Safety Devices; Power Switch - Kärcher K 2 Entry Manuel D'utilisation

●
Accidents or damage due to the de-
vice falling over. Before all actions
with or on the device, you must make
sure that it is stable.
●
Safety devices are provided for your
own protection. Never modify or by-
pass safety devices.
●
Check the device and the accesso-
ries, in particular the power supply
cable, safety lock to make sure it is in
proper safe and reliable condition be-
fore operation each time. Do not use
the device if it is damaged. Replace
damaged components immediately.
ATTENTION:
 Protect the device from extreme
weather conditions, moisture and
heat.
 Operating temperature range:
41 -104 °F (5 - 40 °C)
 Storage temperature range:
-4 -113 °F (-20 - 45 °C)
SAVE THESE
INSTRUCTIONS

Symbols on the device

When connecting the water
inlet to the water supply
mains, the local regulations
of your water company
must be observed. In some
areas, the unit must not be
connected directly to the
public drinking water sup-
ply. This is to ensure that no
chemicals are fed into the
water supply. Direct con-
nection via a receiver tank
or backflow preventer, for
example, is permitted.

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your
own protection.
Never modify or bypass safety devic-
es.

Power switch

The power switch prevents uninten-
tional operation of the device.
Trigger gun lock
The lock locks the lever of the trigger
gun and prevents the device from start-
ing unintentionally.
Overflow valve with pressure
The overflow valve prevents the per-
missible working pressure from being
exceeded. If the lever on the trigger
gun is released the pressure switch
turns off the pump, the high pressure
jet is stopped. If the lever is pulled the
pump is turned on again.
English
switch
5