Transport; Frost Protection; Storage - Kärcher K 2 Entry Manuel D'utilisation

Transport

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Carrying the device
1. Lift up the device by the carrying
handle, and carry it.
Transporting the device in a
vehicle
1. Secure the device against slipping
and tipping over.

Storage

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Storing the device
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Disconnect the high-pressure gun
from the high-pressure hose.
4. Store the mains connection cable
and accessories on the device.
5. Store the high-pressure hose on the
device.
Observe the additional instructions be-
fore storing the device for a longer pe-
riod of time, see chapter Care and
service.

Frost protection

ATTENTION
Danger of frost
Incompletely emptied devices can be
destroyed by frost.
Completely empty the device and ac-
cessories.
Protect the device from frost.
The following requirements must be
satisfied:
 The device is disconnected from the
water supply.
 The high-pressure hose is removed.
1. Switch the device on "I/ON".
2. Wait for a maximum of 1 minute until
no more water escapes from the
high-pressure connection.
3. Switch off the device.
4. Store the device in a frost-protected
room, together with all accessories.
English
14