Interrupting Operation; Finishing Operation - Kärcher K 2 Entry Manuel D'utilisation

Nettoyeur haute pression
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Connect the detergent tank to the
foam cannon.
b.
a.
3. Connect the foam cannon to the trig-
ger gun, and turn the foam cannon
by 90° to lock it.
b.
a.
Recommended cleaning method
1. Spray the detergent sparingly on the
dry surface, and allow the detergent
to react, but not to dry.
2. Spray off loosened dirt with the high
pressure.
After operation with detergent
1. Flush the device with clear water for
approx. 30 seconds.

Interrupting operation

1. Release the lever of the trigger gun.
The device switches off when the le-
ver is released. The high pressure in
the system is retained.
2. Lock the lever of the trigger gun.
13
b.
a.
3. Switch the device off "0/OFF" during
b.
a.
Pressure in the system
Injuries from high-pressure water es-
caping uncontrollably
Only disconnect the high-pressure
hose from the trigger gun or the device
when the system is fully depressur-
ised.
1. Release the lever of the trigger gun.
2. Close the water tap.
3. Press the lever of the trigger gun for
4. Release the lever of the trigger gun.
5. Lock the lever of the trigger gun.
6. Disconnect the device from the wa-
7. Switch off the device "0/OFF".
8. Pull the mains plug out of the socket.
English
work breaks longer than 5 minutes.

Finishing operation

CAUTION
30 seconds.
The pressure remaining in the sys-
tem is discharged.
ter supply.

Publicité

Table des Matières
loading

Table des Matières