Hamilton Beach 33969 Mode D'emploi page 8

840205300 ENv02.qxd:Layout 1
Probe Mode
1
Make sure probe is in center of
food and not touching bottom of
crock.
5
Press arrows to select desired
heat setting. Select HIGH or LOW.
NOTE: Do not use WARM setting
to cook food.
8
6/24/11 1:26 PM Page 8
BEFORE FIRST USE: Wash glass lid and crock in hot, soapy water. Rinse and dry.
IMPORTANT: NEVER lock clips during cooking. Use wire clips to secure lid when
transporting (optional feature).
2
Insert probe into jack on side of
slow cooker.
6
Press ENTER. "Desired Temp" will
illuminate.
3
Press ON (I).
NOTE: To change temperature
display from ºF to ºC:
Press PROBE and ENTER at the
same time. The temperature in
ºC will now be displayed. If the
slow cooker is unplugged, it will
reset to ºF.
4
Press PROBE. "Heat Setting" will be
illuminated.
7
Press arrows to select desired
temperature.