Cleaning Your Blender - Hamilton Beach Commercial 58850 Mode D'emploi

Cleaning Your Blender

1
Unplug.
4
Remove lid.
2
5
Wipe blender base, control panel,
and cord with a damp cloth or
sponge. To remove stubborn
spots, use a mild, nonabrasive
cleanser.
WARNING
Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord, plug,
base, or motor in water or other liquid.
After blending, add 2 cups
(473 ml) warm water and 2 drops
dishwasher liquid to jar. Blend
on CLEAN program. Rinse and
dry immediately. For a more
thorough cleaning, sprinkle
1/4 cup (59 ml) baking soda
in blender. Add 1 cup (237 ml)
white vinegar. Mixture will
bubble. When bubbling subsides,
add 2 cups (473 ml) water and
blend on the CLEAN cycle. Wash
any remaining residue with dish
soap and water. Rinse and dry.
6
Wash all removable parts in
hot, soapy water. Rinse and dry
to maintain appearance. Care
should be taken when handling
the cutting blade assembly since
it is very sharp.
3
Lift blender jar assembly off the
base.
DISHWASHER-SAFE
DO NOT use the "SANI" setting
when washing in the dishwasher.
"SANI" cycle temperatures could
damage your product.
17