Mounting.of.the.housing; Connection - Becker BECK-O-TRONIC 4 Notice D'utilisation

Operating Instructions
Connect the motor, yard light/advance warning lamp, light bar-
rier, external key switch and safety edge detector.
Connect.the.individual.pieces.of.equipment.according.to.the.wiring.plan.
The.light.barrier.input.only.functions.as.object.protection.
Caution
Electrical work must be carried out only by qualified electricians. In all cases
the plug is to be removed from the mains before the equipment is connected.
Note
First of all pull the push-in bushes over the connecting cable and push the
push-in bushes into the lower part of the housing after connecting all wires.
24
Mounting of the housing
Open.the.lid.of.the.control..Remove.the.keyboard.
overlay.plug.from.the.control.and.carefully.place.
the.lid.to.one.side.
Remove.the.required.cut-outs.in.the.bottom.part.
of.the.housing.
Note
Slit the edges. Cut them to size so that the
cut-out coverings can be removed more
easily.
Use. the. enclosed. cardboard. drilling. template. to.
drill.the.holes.for.attaching.the.unit.to.the.wall.

Connection