Energy Saving Tips - BURNHARD NERO Mode D'emploi

Module de gaz
Masquer les pouces Voir aussi pour NERO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 94
Open the gas cylinder valve. Little Bubbles will appear where there are
leaks.Close the gas cylinder valve again.
Close the gas cylinder valve again.
Hand-tighten the nuts on both connection sides again and repeat the
leak test. If you still see bubbles, close the valve on the cylinder and
consult a specialist dealer.
Repeat the leak test every time you change the gas cylinder.

ENERGY SAVING TIPS

1.
Switch off the gas unit when you've finished baking.
2. Turn the gas unit regulator to "LO" during longer breaks.
3. It is not necessary to preheat the pizza oven for longer than the times
indicated.
ATTENTION: Check the gas connections for cracks, tears or wear
before each use. If you find any of these, do not use the gas module
until the weak spot has been repaired.
When you change or unscrew the gas bottle, make sure that there are no
sources of fire like candles, electric appliances or cigarettes within reach.
Always check whether the cylinder is closed properly.
44

Publicité

Table des Matières
loading

Produits Connexes pour BURNHARD NERO

Table des Matières