Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation option 2:
Operation of E-appliances is possible
even without a ventilation opening in
the furniture plinth. The fresh air able to
enter under the appliance is sufficient
for ventilation. The function and life of
the appliance are not impaired. The war-
med air must be able to be exhausted
upwards through the air shaft (min. 200
2
cm
) on the furniture back. If the appli-
ance is ventilated without a plinth ope-
ning, however, the energy consumption
may differ from that specified in the
brochure.
Important note! In order not to impair the function of the appliance,
never cover or obstruct the ventilation openings.
Installation
See installation instructions supplied.
Please check whether, after installing your appliance and especially
after rehingeing the door, the door seal seals right round. An untight
door seal may lead to heavy frosting and thereby to a higher power
consumption (see also „What to do if...").
Electrical connection
A correctly installed, earthed socket is required for the electrical sup-
ply. The supply must have a fuse rating of at least 10 Amps. If the
socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance
from the mains (e.g. a fused spur).
Before initial start-up, refer to the appliance rating plate to ascertain
if supply voltage and current values correspond with those of the
mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
The mains cable may only be changed by a qualified electrician or
Installation
29
Publicité
Table des Matières
