Leister TRIAC S Mode D'emploi page 7

Please read operating instructions carefully before use
and keep for future reference.
Warning
DANGER! Danger when opening up the tool, as live components
and connections are exposed. Therefore, before opening it,
unplug the tool to ensure disconnection from the mains. Before
putting into operation, check power supply cord and connector
as well as extension cable for electrical and mechanical damage.
Incorrect use of the hot air tool (eg overheating of the material) can
present a fire and explosion hazard, especially near combus t ible
materials and explosive gases.
Do not touch the heating element housing, air nozzle and dis-
charging plastizised material when they are hot as they can cause
burns. Let the tool cool down. Do not point the hot air flow and the
discharg ing plastizised material in the direction of people or animals.
Caution
The voltage rating stated on the tool must correspond to the mains
voltage.
For personal protection on building sites we strongly recommend
the tool be connected to a RCCB (Residual Current Circuit Breaker).
The tool must be operated under supervision. Heat can ignite
flammable materials which are not in view.The machine may only be
used by qualified specialists or under their supervision. Children
are not authorized to use this machine.
Protect tool from damp and wet.
Repairs should only be carried out by authorized Leister service
points. Restricted to use with original Leister accessories and
replacement parts. The motor of the fan automatically switches off
when the carbon brushes reach the minimum length.
Translation of the Original User Manual
Warranty
• For this tool, we generally provide a warranty in accordance with the statutory/
country-specific regulations from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be corrected by replacement
or repair. Heating elements are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded
from the warranty.
• Warranty claims will be rejected for tools that have been altered or changed by
the purchaser.
Conformity
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,
confirms that this product, in the version as brought into circulation through
us, fulfils the requirements of the following EC directives.
Directives:
Harmonized EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,
Standards:
Kaegiswil, 02.02.2016
Bruno von Wyl, CTO
Disposal
2006/42,
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016),
2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016),
2011/65
EN 61000-3-2, EN 61000-3-3, EN 62233, EN 60335-1,
EN 60335-2-45, EN 50581
Andreas Kathriner, GM
Electrical equipment, accessories and packaging should be recycled in an
environmentally friendly way. For EU countries only: Do not dispose of electrical
equipment with household refuse!
Deutsch Deutsch
English English
Français Français
Español Español
Português Português
Italiano Italiano
Nederland Nederland
Dansk Dansk
Svenska Svenska
Norsk Norsk
Suomi Suomi
Eλληνικά Eλληνικά
Türkçe Türkçe
Polski Polski
Magyar Magyar
Cesky Česky
Slovensky Slovensky
Românã Românã
Slovensko Slovensko
Български Български
Eesti Eesti
Lietuviu
Latviešu
Русский
日本語
7