Kohler K-9531 Guide D'utilisation page 6

Construct 2x4
stud framing
according to the
roughing-in
information.
Position
the rough
plumbing.
Verify that the
subfloor offers
adequate support,
and is flat and level.
3. Construct the Stud Framing
If you will be installing a shower door with this unit, refer to the shower door installation
instructions for any special framing considerations.
Construct 2x4 or 2x6 stud framing according to the roughing-in information for your particular
model.
Verify that the framing is square and plumb.
If grab bars are to be installed, provide 2x6 bridging or attachment at specified positions. Refer to
the grab bar manufacturer's instructions.
The basin area requires no additional support when the subfloor is plumb and level with respect to
the stud framing. If the subfloor is not level, shimming may be required to level the unit.
1030520-2-B
Masonry Wall
6
2x4 Stud Framing
6" (15.2 cm) Min
Kohler Co.