Warranty - YASKAWA SGD7S-OSB01A Manuel D'instructions

WARNING!
•
AC/DC type) that are appropriate for the product.
•
or failure. The warranty is void for the product if you disassemble, repair, or modify
it.
CAUTION!
• Please make sure that the servo drive is completely disconnected from the power
• For a 24-VDC power supply, use a power supply device with double insulation or
reinforced insulation. There is a risk of electric shock.
• Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch
cables. There is a risk of failure, damage, or electric shock.
• The person designing the system using any of the safety functions of the safety
module must have full knowledge of the relevant safety standards and a complete
understanding of the instructions in this document.
There is a risk of injury, product damage, or machine damage.
• Do not use the product in an environment that is subject to water, corrosive gases,
NOTICE!
• Do not attempt to use any components that are damaged or that have missing
parts. There is a risk of product failure.
• Prevent electrostatic impact on the safety module. There is a risk of product failure.
1.9

Warranty

Details of Warranty
Warranty Period
The warranty period for a product that was purchased (hereinafter called "delivered product")
from the time of shipment from the Yaskawa factory, whichever is sooner.
Warranty Scope
Yaskawa shall replace or repair a defective product free of charge if a defect attributable to
Yaskawa occurs during the warranty period above. This warranty does not cover defects
caused by the delivered product reaching the end of its service life and replacement of parts
that require replacement or that have a limited service life.
This warranty does not cover failures that result from any of the following causes.
1. Improper handling, abuse, or use in unsuitable conditions or in environments not
2. Causes not attributable to the delivered product itself
4. Abuse of the delivered product in a manner in which it was not originally intended
6 YASKAWA EUROPE TOMP YEUOS7S 01A – Sigma-7 Series Advanced Safety Module – Instruction Manual