Using The Safety Module; Safety Precautions - YASKAWA SGD7S-OSB01A Manuel D'instructions

Always leave the safety module attached to the SERVOPACK when sending it to
Yaskawa for troubleshooting.
Parameterisation
interface and the Yaskawa software "Advanced Safety Module Parameter Editor" is required.
Further information on this topic can be found in the product manual.
Name
Advanced Safety Module for Sigma-7 SERVOPACKs
SGD7S- DA0 8
Be sure to always use the most recent version of this manual.
6

Using the Safety Module

6.1

Safety Precautions

WARNING!
• Installation or disassembly must be performed only by authorized personnel.
Failure to observe this precaution may result in electric shock or injury.
• The dynamic brake is not a safety-related part of a control system. Create the
safety design of the mechanical system in such a way that any trouble in the
dynamic brake function does not create a hazard when the safety functions of the
safety module operate.
Improper use may result in injury or damage to the product.
• Connect device conforming to the relative safety standards to the connector for
safety request input signals.
Improper use may result in injury or damage to the product.
• The safety functions of the safety module are not for shutting OFF the power supply
to the SERVOPACK and do not provide electrical isolation. Be sure to separately
shut OFF the power supply to the SERVOPACK when performing maintenance or
inspection of the SERVOPACK.
Failure to observe this warning may result in electric shock.
• Be sure to check the safety-related parameters before using the safety functions of
the safety module.
Improper use may result in injury or damage to the product.
• If the safety module or the SERVOPACK has been changed or replaced, please
check the correct wiring and ensure the functionality of the safety functions
according to the actual application environment.
Improper use may result in injury or damage to the product.
22 YASKAWA EUROPE TOMP YEUOS7S 01A – Sigma-7 Series Advanced Safety Module – Instruction Manual
F91, 400 V, Product Manual
Manual number
SIEP YEUOS7S 01