Storage; Storage And Transportation Precautions - YASKAWA SGD7S-OSB01A Manuel D'instructions

8

Storage

in chapter 3.2 "Environmental conditions".
8.1

Storage and transportation precautions

CAUTION!
• Do not place an excessive load on the product during storage and transportation.
(Follow all instructions on the packages.)
There is a risk of injury or damage.
NOTICE!
• Do not install or store the product in any of the following locations.
– Locations that are subject to direct sunlight
– Locations that are subject to ambient temperatures that exceed product
– Locations that are subject to relative humidities that exceed product
– Locations that are subject to condensation as the result of extreme changes in
temperature
– Locations that are subject to dust, salts, or iron powder
– Locations that are subject to water, oil, or chemicals
– Locations that are subject to vibration or shock that exceeds product
– Locations that are subject to radiation
If you store or install the product in any of the above locations, the product may fail
or be damaged.
• Do not subject connectors to shock.
There is a risk of faulty connections or damage.
• If disinfectants or insecticides must be used to treat packing materials such as
wooden frames, plywood, or pallets, the packing materials must be treated before
the product is packaged, and methods other than fumigation must be used.
56 °C for 30 minutes or more.
If the electronic products, which include stand-alone products and products
installed in machines, are packed with fumigated wooden materials, the electrical
components may be greatly damaged by the gases or fumes resulting from the
fumigation process. In particular, disinfectants containing halogen, which includes
YASKAWA EUROPE TOMP YEUOS7S 01A – Sigma-7 Series Advanced Safety Module – Instruction Manual 27