Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Before cooking with your appliance for the first time, burn off any foreign matter and rid the unit of any odors
by burning the main burners only on HIGH for about 10 minutes.
Flame Adjustment
a. Become familiar with the safety instructions at the front of this manual. Do not smoke while lighting
the appliance or checking the gas supply connections.
b. Make sure that all gas connections are securely tightened and have been leak-tested with a
soapy water solution – never with a flame!
c.
Turn burners to low flame setting and test for proper flame height. Flame should be stable and
burning out of each burner port without danger of going out in the lowest setting.
LOW flame setting simply light the appliance on the LOW setting and adjust the screw
located under the knob on the front of the valve using a flat head screwdriver as seen in
the diagram below.)
Low flame setting
screw
BLAZE Instructional Book
Page | 28
(To adjust the
Publicité
Table des Matières
Dépannage
