BLAZE BLZ-SB2LTE Guide D'utilisation Et D'entretien page 27

You will hear a loud click as the electronic lighter produces a spark. Listen for the sound of the gas
4.
igniting and look for a flame through the cooking grate. If the burner does not light on the first try,
repeat immediately.
If the burner does not light in 5 seconds, turn the burners off and wait five minutes with the lid off
5.
until the gas clears before attempting to light it again. Repeat the procedure or try the manual
lighting procedure below.
If the burner does not light after several attempts, immediately close all gas valves and consult an
6.
authorized service technician.
Upon successful lighting, repeat the process on the other burner you wish to light.
7.
To shut off the burners, rotate the knob and turn to OFF. It is normal to hear a popping sound when
8.
the burners are turned off.
Close the valve at the gas supply.
9.
Manually Lighting the Main Burners
WARNING: Do not use standard size matches or cigarette lighters to perform match-lighting procedures.
Serious burns can occur and lighters can explode.
Remove the top stainless steel cover.
1.
If you have just attempted to light the burner, allow five minutes for any accumulated gas to
2.
dissipate. Use caution by standing as far away from the burners as possible. Do not put your hands,
arms, head or any body parts close to the burner when lighting.
Hold your open flame to the top of the burner head.
3.
Push in and turn the control knob to HIGH.
4.
If the burner does not light after five seconds, turn the control knobs to the OFF position.
5.
Wait five minutes until the gas clears before attempting to light it again.
6.
If the burner does not light after several attempts, immediately close all gas valves and consult an
7.
authorized service technician.
BLAZE Instructional Book
Page | 27