Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.4
Date/time and contrast setting
If you want to ...
A
... set the date/time and contrast
on the display.
1. Call status messages. For this
purpose touch the corners of
the display
– top right 0 and bottom left 1
or
– top left 2 and bottom
right 3.
The first corner to be touched must
not contain a selectable field.
2. Select the menu for time/date
and contrast.
B
... set date/time.
1. Touch the SET CLOCK" field to
select the menu.
2. Select the desired field.
3. Change the value.
4. If necessary, repeat step 2. and
3. to change additional values.
5. Confirm the input.
– The menu for time/date and
contrast is displayed.
EDBPM−H505 DE/EN/FR 6.1
Date/time and contrast setting
Touch the fields ...
PROG
or
or
l
Commissioning
Example
2
1
Port
: NET
Driver : CAN Lenze M
Ver
: 1.12
Addr
: NO ADDRESS
Error
: RESET
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
12:50:10 13/09/00
5
0
3
PROG
TRANS
PAGE
ESC
ESC
ESC
73
Publicité
Table des Matières
