Beurer NA 20 Mode D'emploi page 37

2� Twist the nasal secretion con-
tainer anti-clockwise (a half
rotation)� Then pull it down and
off�
3� We also recommend
removing the rubber
seal (1) as well as the
valve (2) from the head
unit, so that no bacteria
can accumulate there�
4� Clean the silicone attachment, nasal secretion
container, rubber seal and valve with hot water and
some mild soap� Do not use any harsh cleaning
products� To disinfect the silicone attachment and
the nasal secretion container, place them in boil-
ing water for 3 to 5 minutes� Contact between the
parts and the hot base of the pan should be avoid-
ed� Place the individual components subsequent
on a dry, clean and absorbent surface and allow to
dry completely (for at least 4 hours)�
37
2
1