Foro LS7300 Mode D'emploi page 9

Step 2: With at least two people carefully tilt
the appliance on to its side to install the castor
wheels. Use a spanner and the supplied nuts
and washers to install the wheels to the base
of the appliance.
Step 3: Add the fuel bed.
Note: for this step you will need a small step
ladder or platform as the fuel beds need to be
installed f rom the top of the appliance.
GLASS OR LAVA ROCK
PAN BURNER
This should be done outside. Cover the burner
with either glass or lava rock fuel beds. Do NOT
tip the bag of glass or lava rock onto the burner
as the bags usually contain some f ine dust
which could clog the burner jets. It is better to
empty the bags into a suitable container and
then place the glass or rock around the burner
by hand. Make sure the area around the pilot
light is kept clear to allow air to reach.
FØRO LS7300 - MANUAL
9
FOR STAR OR
Glass
Lava rock
EN