Specifications - Foro LS7300 Mode D'emploi

SPECIFICATIONS

The gas f ireplace is designed to work with the following gas types:
GAS CATEGORIES:
TYPES OF GAS:
GAS PRESSURE:
TOTAL HEAT INPUT:
INJECTOR SIZE:
COUNTRIES OF DESTINATION:
SERIAL NUMBER:
WARNING: Accessible parts may be very hot. Keep young children away.
Read the instructions before using this appliance. The appliance must be installed in
accordance with the instructions and local regulations.
Close the valve of the gas cylinder or the regulator after use.
The use of this appliance in enclosed areas can be dangerous and is PROHIBITED.
For use outdoors or in amply ventilated areas. An amply ventilated area must have a
minimum of 25 % of the surface area open. The surface area is the sum of the
FØRO LS7300 - MANUAL
7
I3+
Butane / Propane
Butane:
28 – 30 mbar
Propane: 37 mbar
7.3 kW
(G30: 531 g/h -
G31: 522 g/h)
1.32 mm
(Pilot: 0.25 mm)
This appliance is not for domestic use.
walls surfaces.
I3B/P
LPG mixtures LPG mixtures
28-30 mbar
7.3 kW (531 g/h) 7.3 kW (531 g/h)
1.32 mm
(Pilot: 0.25 mm) (Pilot: 0.18 mm)
NL, BE, DE, FR & LUX
20218504
EN
I3B/P
50 mbar
1.18 mm