Technical Data - Altrad TUBMIX 50 Manuel De L'opérateur

GB

Technical data

Power supply: 115V 50Hz.~
Max. absorbed power:
Max. active power:
Capacitor (230V~50Hz.):
Capacitor (115V~50Hz.):
Weight:
Basket capacity:
Allowed functioning:
Rotation Speed:
IP Degree:
Recommended use:
TILE ADHESIVES, CEMENT, PLASTER, PAINTS,
VARNISH AND EPOXY RESINS.
CAUTION !
The noise level of the machines has been
measured in compliance with standard ISO3745-77.
Lw
Lw
1. Use
CAUTION !
Before using the machine read the safety
instruction chapter carefully.
All machines have been thoroughly tested and
checked before leaving our factory.
BELLE works for a continuous development of
the machines the company manufactures,
therefore the company reserves the right to
modify its models. No rights can be claimed as
far as the data and the pictures of this manual
are concerned.
The TUBMIX is a mixing machine for tile adhesives,
cement, plaster, paints, varnish and epoxy resins.
2. Precautions
•
230V 50Hz.~
1200W
•
750W
•
20 µF
85 µF
25 Kg.
50 Kg.
S1
3. Installation
continuous load
Assemble the top frame and the transporting handle
55 min -1
as shown in Fig. 1.
Insert the connecting pin fixing it with the safety clip,
44
paying attention to the mechanical block.
1 1
76,6 [dBW(A)]
62,7 [dB(A)]
Insert all the different parts in the order shown in
Fig. 2, then lock everything in place using the
22 mm hexagon spanner provided.
2 2
2
The manufacturer declines any liability for the
use of the TUBMIX with tools and materials
other than the original ones and not indicated in
the paragraph "RECOMMENDED USE".
The TUBMIX is designed to work exclusively
according to the admissible working conditions
indicated.
Never introduce foreign objects or tools into the
tub during operation with the agitator in rotating.