Maintenance - Spare Parts; Technical Data - Altrad B 130 Manuel D'utilisation

GB
Concrete mixers B 130 - B 150 - B 165 - B 180

TECHNICAL DATA

Drum capacity
Maximum mixing capacity
Single phase motor 230V/50Hz - Used power
Length
Width
Height
Wheels
Weight with electric motor
4
3
5
2
1
Concrete
Mortar
- Set the drum at the selected angle (on one side
or the other). The angle the nearest to the
horizontal will provide a better mixing of the
agregates, but will reduce the capacity.
- Put some water into the drum, spread the right
quantity of cement over the agregates (gravel or
sand), and load the drum. Add some water while
loading.
- The enclosed chart will guide you in the
proportions of your works. The quantity of water is
given as an indication only ; it will depend on the
degree of humidity of the agregates.These
proportions are given as information only, and
PRODUCTION OF CONCRETES ANS MORTARS
The tilting disk has 7 different notches
Position 1
Position 2
6
Position 3
Position 4
7
Position 5
Position 6 et 7
Batch for usual concrete and mortar (with
one 25 kg cementbag).
Sand
30 L
60 L
INSTRUCTIONS FOR USE

MAINTENANCE - SPARE PARTS

B 130 B 150 B 165 B 180
Lt 130
Lt 100
W 600
mm 1220
mm 700
mm 1280
ø mm 160
kg 50
Opening of the drum upward.
Mixing on lefthand side.
Emptying on lefthand side and storing.
Opening of the drum downward.
Emptying on righthand side and storing.
Mixing on righthand side.
Gravel
cannot engage the responsability of the
manufacturer.
- 1 shovel = 4 litres, 1 wheelbarrow = 60 litres.
- Let the drum turn during one minute or so, in
order to obtain a good mix. Do not continue the
mixing beyond two minutes otherwise you will
centrifugate the materials.
The above sizes are for your information and
cannot engage
manufacturer.
11
150 160
115 130
600 700
1220 1220
700 700
1280 1340
160 160
51 54
Water
60 L
-
the responsibility
175
140
800
1230
700
1420
200
57
around
13 L
around
13 L
of the