Thermostat Mounting; Set The Time And Date - Honeywell T6 Pro Serie Notice D'installation

Thermostat mounting

1. Push excess wire back into the wall
opening.
2. Close the UWP door. It should remain
closed without bulging.
3. Align the UWP with the thermostat, and
push gently until the thermostat snaps in
place.
4. Turn the power on at the breaker box or
switch.

Set the time and date

Time
1 Press Menu on your thermostat.
2 Press or to go to TIME. Press Select.
3 Press or to choose between 12 or 24 hour.
Press Select.
4 Use or to adjust the hour. Press Select.
5 Use or to adjust the minutes. Press Select
to exit Time menu.
Date
1 If previously setting time, continue to Step
2. If at the Home screen, press Menu on your
thermostat.
2 Press to go to DATE. Press Select.
or
3 Use or to adjust year. Press Select.
4 Use the or
5 Use the or
save and exit Date menu.
to adjust month. Press Select.
to adjust day. Press Select to
6