Changing The Water Filter - Atag KA2111DC Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Changing the Interior Lights in the Freezer
The freezer light is located in the bottom of the auger motor case.
2. Replace the bulb with a new one.
3. Reattach the light cover.
CHANGING THE WATER FILT
The "Filter Indicator" light lets you know when it is time to change your water filter cartridge. To give you
some time to get a new filter, the light will come on up just before the capacity of the current filter runs out.
Changing the filter on time provides you with the freshest, cleanest water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.
in September. Normally filter life is about every 6 months.
3. Next, remove the fixed cap by turning it counter clockwise.
Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, locking
the filter in position. Make sure that the indicator is lined up with the "lock" position. Do not over
tighten.
Sticker r r
38_
operating
2
L
L
ER
4
3
Cover filter
mark with lock
position
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ka2111dlKa2111dpKa2111dqKa2192dl

Table des Matières