Reattaching The Refrigerator Doors - Atag KA2111DC Notice D'utilisation

setting up your side-by-side
refrigerator

REATTACHING THE REFRIGERATOR DOORS

Once you have safely placed your refrigerator where you plan for it to stay, it is time to put the doors back on.
Reattaching the Freezer Door
1. Replace the freezer door by inserting the water line
lower corner of the door and then into the hole on the lower hinge
Gently pull the water line back down so that it runs straight, with no kinks
or bends.
2. Insert the upper hinge shaft
freezer door
hinge hole
hinge screws
direction.
3. Reconnect the wires.
reattach with the screw.
3
into the hole on the corner of the
4
. Make sure the hinge is level between the upper
5
and the hole of the cabinet
7
and ground screw
1
back into the
6
and reattach the
8
by turning in a clockwise
9
on the front of the upper hinge
9
2
.
8
7
5
6
10
and
10
_13
setting up
1
2
3
4