General Description; Function Description; Summary; Assembly - Grizzly ERM 1333 G Traduction De La Notice D'utilisation Originale

GB
socket if the extension cable
is damaged. If the extension
cable is damaged, it must be
replaced by the manufacturer,
the customer services of the
same, or a qualified person, in
order to avoid hazards.
• Do not connect a damaged ex-
tension cable to the mains. Do
not touch a damaged exten-
sion cable when it is connected
to the mains. A damaged
extension cable may result in
contact with live parts.

General Description

Function Description

The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It
is equipped with a high performance elec-
tric motor, robust plastic housing, safety
switch, collision guard, and grass box.
Additionally, the equipment is height ad-
justable to three levels and has smooth-
running wheels.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the
appliance can be found on the
pages 2-3.

Summary

1 Curved handle
2 Tightening lever
3 Lower bar
4 Loop handle of the grass box
5 Collision guard
6 Grass box
7 Cutting height adjuster
8 Rear wheels
36
All manuals and user guides at all-guides.com
9 Front wheels
10 Lawnmower housing
11 Connection cable
12 2 Cable holder
13 Appliance socket
14 Release button (no illustration)
15 Cable strain relief
16 Start lever

Assembly

Ziehen Sie vor allen Arbeiten an
dem Gerät den Netzstecker. Es
besteht die Gefahr von Personen-
schäden.

Assembling the Curved Handle

1. Insert the lower bar (3) into the slot
on the lawnmower housing (10).
2. Fix the bar (3) using the en-
closed screws.
C
3. Fasten the bow-type handle (1)
with the enclosed screws, the
washers and the upper tighten-
ing levers (2) both right and left
of the lower bar (3). Two posi-
tions are possible. There are
two possible positions.
4. Turn the tightening lever (2) in
the clockwise direction.
5. Lock the tightening lever (2) by
pressing it in the direction of the

bar ). The tightening lever fit
the bar so that a tensioning with
medium force can be carried out.
Otherwise, the tightening levers
must be turned clockwise for ten-
sioning them or anti-clockwise to
loosen them (
6. Clip the cable holder (12) into
the bar (3) and thus fix the ca-
ble. (11).
‚
).