Dri-Eaz DrizAir 1200 Manuel Du Propriétaire page 6

Diagram 1
DrizAir 1200
07-01486 A 04-04 Copyright 2004 Dri-Eaz Products, Inc.
READ AND SAVE THESE INSTRUCTIONS
Check coils, and clean when visibly dirty (see diagram 1). Dirty
•
coils can cause the unit to overheat.
1. Unplug unit
2. Remove housing, locate coils and allow coils to dry if wet.
3. Vacuum both sides of the coils until clean, being careful not to let the
Check catch basin tray, and clean when dirt and debris are present.
•
1. Wipe clean with a rag.
• Check drain hose.
1. Look for obstructions. Disconnect and clear any debris present.
2. Reattach gravity drain hose.
Annually
Have the pump system inspected.
1. Call a the Dri-Eaz Service Department, and they'll help locate a
2. To inspect the pump system yourself, use the detailed instructions
nozzle touch the fins; as that may cause damage by bending them.
service center near you 888-867-3235.
located at www.dri-eaz.com in the Service section. Once there, click
"repairs" on the left menu and select Troubleshoot a leaking
pump. Be sure to follow the directions specific to the model you
own. If you have questions as you go through the process, call a Dri-
Eaz Service associate for assistance at 888-867-3235.
Diagram 2
DrizAir 2000/2400
6