Controls And Jacks - koban KMD-16 Mode D'emploi

KMD-16
TRMS Multimeter
2. USE EXTREME CAUTION whe n wor king with high voltages.
3. DO NOT measurevoltageifthevoltageonthe"COM"inputjackexceeds600Vabove earth ground.
4. NEVER connectthemeterleadsacrossavoltagesourcewhilethefunction switch is in the current, resistance, or diode mode.
Doing so can damage the meter.
5. ALWAYS dischargefiltercapacitorsinpowersuppliesanddisconnectthepower when making resistance or diode tests.
6. ALWAYS turnoffthepoweranddisconnectthetestleadsbeforeope ning thecovers to replace the fuse or batteries.
7. NEVER operatethemeterunlessthebackcoverandthebatteryandfusecovers are in place and fastened securely.
8. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may
be impaired.

4. Controls and jacks

1. Battery Cover
2. 4,000 counts LCD Negativity display
3. RANGE button
4. MAX/MIN button
5. Mode button
6. HOLD and Flashlight button
7. Function switch
8. COM input jack
9. 10A input jacks
90 www.grupotemper.com