Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
KMD-16
TRMS Multimeter
2.
Open the rear battery cover by removing the screw using a Phillips head screwdriver.
3.
Insert the battery into battery holder, observing the correct polarity.
4.
Put the battery cover back in place. Secure with the screw.
WARNING:To avoid electric shock, do not operate the meter until the battery cover is in place and fastened securely.
NOTE:If your meter does not work properly, check the fuses and batteries to make sure that they are still good and that they
are properly inserted.
105
www.grupotemper.com
Publicité
Table des Matières
