R/W
R/W
The register value could be updated using the ATSn=m<cr> command and displayed using ATSn?<cr> com-
mand.
The registers are shared in 2 types: read only (R) or read/write (R/W)
7.
Specifications
Supply voltage
Transmission consumption
Reception consumption
Operating temperature
Packaging
Size / Weight
Standard compliance
Programmable frequencies
Frequency stability
Channel Spacing
Air rate
Modulation
Output power
Output impedance
Sensitivity
Adjacent channel rejection
Intermodulation
Serial data rate
UG_ARF73 V1.7
All manuals and user guides at all-guides.com
S237
Owner
S260
Firmware
upgrade
General technical characteristics
10 to 28 Volts
16VA (under 4W)
2VA
-30°C to +70 °C
IP65 Box with TNC female antenna
connector
169x100x55 mm + antenna / 710g
EN300-113 / EN301-489 / EN60950
Radiofrequency
406 to 470MHz (under licence)
± 1kHz
12.5kHz
4800 bits/s
9600 bits/s
Transmitter
GMSK BT=0.5
0.5W (27dBm)
1W (30dBm)
2W (33dBm)
4W (36dBm)
50 Ohms
Receiver
-112 dBm
65dB typ.
65dB
Protocol
4800bps
9600bps
19200bps
38400bps
57600bps
115200bps
An available register with
free format for customer
information
Must always be left to 0
0 -> no upgrade
1->upgradefirmwareafter
next ATO command
Software selectable
Software selectable
Software selectable
blank
0
30