Hamilton Beach 70550 Mode D'emploi page 7

How to Lock the Cover
How to Operate the Controls
Processing Using Chopping/Mixing Blade
Please see the Easy to Use Assembly
Guide on page 5.)
The Chopping/Mixing Blade can be used to coarsely
chop, finely mince, mix, or puree food to a smooth
consistency.
1. Make sure the Control Switch is turned to OFF and
the unit is unplugged.
2. Lock the bowl onto base. (See "How to Lock the
Bowl" on page 6.)
3. Place the Chopping/Mixing Blade onto motor shaft
of food processor in center of bowl. Turn slowly
until blade drops into place. Handle carefully; the
blade is sharp.
4. Lock cover onto bowl. (See "How to Lock the
Cover" on page 7.) Insert food pusher into food
chute.
5. Plug in unit and process food. The processing
speed and time will determine the finished
consistency of the food. The Pulse button can help
you avoid overprocessing.
Align cover as illustrated. Place cover on bowl
and turn clockwise until it locks into place.
NOTE: The food processor will not work
unless the cover is locked into position.
The control is conveniently located on top of
the base. Rotate the knob to select a speed:
1 (Low) or 2 (High). The processor will run
continuously. For instant on and off control,
use the PULSE button.
Chopping/
Mixing Blade
Motor
Shaft
7