Dyson Pure Hot+Cool Link Manuel D'utilisation page 57

Replacing the filter unit
10
13
6 sec
The Dyson Link app will notify you when your non-washable filter needs to be replaced.
The filter indicator can also be reset from within the Dyson Link app.
Please note your filter may require replacing more frequently with more use.
11
click
A clockwise-rotating loading pattern will be
shown on the LED display.
When you have re-assembled your appliance, press and hold the 'Standby ON/OFF' button
for 6 seconds on the remote control to reset the filter indicator.
12
Clean the hatch every time the filter is
replaced. Open the small hatch on the
side of the appliance. Use a cotton bud
to clean inside and remove any debris.
This maintains sensor accuracy and
ensures the continuing high performance
of the appliance.
click
Once the loading pattern is complete, the
appliance will return to its normal usage.
57