Makita PDC01 Manuel D'instructions page 10

Only for EU countries
Li-ion
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
SAFETY WARNINGS
Portable power pack safety
warnings
Be sure to read the instruction manual of the
1.
tool or machine before use.
Do not pick up or carry this unit by holding
2.
only the cord. Do not pull the cord while you
are wearing or using this unit.
3. Before wearing or putting off the unit, remove
the socket from the tool or machine.
4. When you leave the tool or machine, be sure to
remove the adapters from the tool or machine,
or remove the unit from your body.
5. Be careful not to trip over the cord during
operation.
6. Do not use this unit on an unstable surface, or
unstable high places.
7. Do not use multiple units by connecting one
unit to another unit.
During operation, keep the cord away from
8.
obstacles. The cord caught by obstacles may
cause serious injury.
Do not insert the adapters into the charger.
9.
10. Do not install the adapters to the battery ports
of this unit.
11. This unit is designed exclusively for use with
18 V batteries. Do not use the batteries other
than 18 V batteries.
12. Inspect the unit, cords, and harness before
use. If they are damaged, ask your local Makita
Authorized Service Center for repair.
13. When attaching the cord to the cord holder, be
sure to attach it slowly and securely.
14. Always make sure that the tool or machine is
switched off and the adapters are removed
before attempting to perform inspection or
maintenance of the tool or machine.
15. When using this unit with a tool equipped with
a blade, be sure to keep the cord away from
the blade.
16. When wearing the unit, do not put on anything,
such as safety harness or shoulder belt, which
may interfere the emergency detachment func-
tion of the unit.
17. Do not use this unit while you are climbing up
in a tree.
18. Do not use this unit when you are wearing
cordless fan jacket or cordless heated jacket.
19. Do not expose this unit to sparks.
20. When using this unit without wearing it, be
sure to lay down the unit.
21. Do not let water enter into the cover.
22. Do not disassemble, repair, or modify the unit.
23. Be careful not to entangle the harness or belt
by the tool or machine.
24. When using the unit, be careful not to cut the
cords with the tool or machine.
25. Keep foreign objects such as metal chips and
water away from the plug of the unit.
26. Do not use the tool or machine near high-volt-
age power lines.
27. Do not damage the case of the battery or place
anything on the unit.
28. Do not step on the unit or sit on the unit.
29. Store the unit indoors.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble or tamper with the battery
cartridge. It may result in a fire, excessive heat,
or explosion.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
Do not short the battery cartridge:
5.
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store and use the tool and battery car-
tridge in locations where the temperature may
reach or exceed 50 °C (122 °F).
10 ENGLISH