Applications - Samlex Solar SRV-100-30A Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SECTION 1 |
Never smoke or allow a spark or flame near the batteries.
Use caution to reduce the risk of dropping a metal tool on the battery. It could spark or short circuit the
battery terminals or other electrical parts and could cause an explosion.
Remove metal items like rings, bracelets and watches when working with batteries. Batteries can produce
a short circuit current high enough to weld a ring or the like to metal and thus, cause a severe burn.
If you need to remove a battery, always remove the Ground Negative terminal from the battery first.
When connecting the battery, connect the Ground last. Make sure that all the accessories are off so that
you do not cause a spark.
Use properly insulated tools when making battery connections.
Precautions When Working With Solar Panels
With the incidence of sunlight or other light sources on solar panels, a voltage appears at the output
terminals of the solar panel turning it into a source of electricity. To avoid a shock hazard, make sure the
solar panel is covered with an opaque (dark) material such as paper/cloth during installation. Do not make
contact with the terminals when the panel is exposed to sunlight or any other light sources.
SECTION 2 |
Solar Charging Kits SRV-100-30A, SRV-150-30A and SRV-200-30A provide clean, green, silent and sustain-
able source of solar-based DC power to charge 12V Lead Acid batteries. Each kit comes with the following:
High efficiency solar panel with MC-4 Connectors
State-of-the-art, 30A Charge Controller
Connecting Wires with mating MC-4 Connectors
Mounting Brackets
Installation Hardware
DETAILS OF SOLAR PANEL
Design Features
High Conversion Efficiency generates more energy per square meter
Protective Bypass Diodes avoid effects of partial shading
Weatherproof Junction Box and Connectors, Optical Low Iron Tempered Glass, EVA Resin and
Aluminum Frame for operation in outdoor, wet and marine applications
Highest manufacturing standards - Test ID for each panel
Strong frame withstands high wind force

Applications

Residential Roof-top Systems
Commercial / Industrial Building Roof-top Systems
Rural area applications
Other on-grid and off-grid applications
Automotive, RV and Marine
4 | SAMLEX AMERICA INC.
General Safety
Description and Components

Publicité

Table des Matières
loading

Produits Connexes pour Samlex Solar SRV-100-30A

Ce manuel est également adapté pour:

Srv-150-30aSrv-200-30a

Table des Matières