Turntable Adjustments - THORENS TD 206 Mode D'emploi

Turntable adjustments

The turntable can be levelled by adjusting the three
plinth feet from above with the help of the 5-mm hex
key.
➔ Fig. 4
The platter speed can be adjusted by turning the ad-
justment screws on the bottom of the speed switch unit.
➔ Fig. 5
The platter speeds are factory-adjusted. Any readjust-
ment of the speeds should be checked with the help
of a test record or a strobe disc.
Please also refer to "Belt Tension"
➔ Page 25
TD 206
45
Fig. 5
TD 209
Fig. 4
33
27