Getting Started; Unpacking Elite; Connecting The Power Supply - Sonoro ELITE SO-911 Mode D'emploi

3.

Getting started

3.1

Unpacking ELITE

1. Take ELITE out of the packaging and check whether ELITE or the individual
parts are damaged. If this is the case, do not use ELITE. Should you detect
any damage, contact your dealer or sonoro audio GmbH customer support
immediately.
2. Check to make sure that the delivery is complete (see chapter "Scope of
delivery").
3. Place ELITE in a suitable location. If you want to put your ELITE on a natural
wood surface, please make sure that it is suitable. Oiled or waxed surfaces
may cause stains.
4. Remove the protective film from the display.
3.2

Connecting the power supply

Power is supplied to the device via the AC adapter (included). The AC adapter
with universal adapter must be connected before use.
1. Push the universal adapter onto the AC adapter until it clicks into place.
2. Insert the plug connector of the AC adapter into the DC port at the back
side of the device.
3. Insert the mains plug into the socket.
70 © sonoro audio GmbH 2022