Scope Of Supply; Rating Plate; Technical Specifications; Pump Specifications - SFA SANIPUMP Notice De Service

Its operating principle is as follows: when the level of effluents contained in the
sump where the SANIPUMP
pumping station.
The effluent is automatically pumped to drain into the sewer pipe.
Waste water is discharged :
- by a DN 40 (ext. diameter 50) for SANIPUMP
- by a DN 50 (ext. diameter 63) for SANIPUMP

3.2 Scope of supply

Submersible SANIPUMP
H05VV-F-3G type 1.5 mm², with a length of 10 metres.

3.3 Rating plate

1 Name of the pumping station
2 Power consumption of motors
3 Power supply voltage
4 Frequency
5 Protection index
6 Production date
7 ID number
3.4 Technical specifications SANIPUMP

Pump specifications

Flow rate (H = 1 m)
Max Height (Q = 0)
ON/OFF level
Maximum immersion height
Activation system
Thermal overload protection
Power
Motor consumption
Maximum current consumption
SANIPUMP pump curve
®
22
is installed is sufficient, the float switch starts up the
®
®
®
pump with float switch, mounting base and pump power supply cable
®
SANIPUMP
10.5 m
14 m
400/100 mm
5 m
Float
Yes
Single phase
220-240 V / 50-60 Hz
1 x 1,500 W
6 A
bladed macerator
vortex
1
1
®
macerator
®
SANIPUMP
/h
3
220-240 V/50-60Hz
4
2
3
5
7
6
4
2
3
5
7
6
vortex
®
27 m /h
3
13 m
400/100 mm
5 m
Float
Yes
Single phase
1 x 1,500 W
6 A