Philips HP6370 Mode D'emploi page 14

EnglisH
14
Cleaning the precision trimming head and combs
after every use
1 Press the on/off button to switch off the appliance (Fig. 11).
2 If a comb is attached to the precision trimming head, remove
the comb (Fig. 10).
3 Remove the precision trimming head (Fig. 8).
4 Brush the hairs off the precision trimming head or rinse it under
the tap (Fig. 26).
5 Brush the hairs off the combs or rinse them under the tap.
6 To dry the precision trimming head and the combs, shake
them firmly or use a tea towel (Fig. 27).
7 To reattach the precision trimming head, slide it into the guiding
grooves on both sides of the opening in the handle ('click') (Fig. 7).
Note: Make sure that the precision trimming head is completely dry before
you reattach it onto the appliance.
Maintenance
1 Lubricate the cutting unit (double shaving foil and trimmer) and
the precision trimming head with a drop of sewing machine oil
twice a year (Fig. 28).
2 After you have put the oil on the cutting unit and the precision
trimming head, assemble them onto the handle and let the
appliance operate briefly to spread the oil.
replacement
The shaving head, the precision trimming head, both combs (3mm and
5mm) and the adapter of the appliance can be replaced. If you need to
replace one or more parts, go to your Philips dealer or an authorised
Philips service centre. If you use the Ladyshave two or more times a
week, we advise you to replace the shaving head after one or two years
or if it is damaged.