Philips HP6370 Mode D'emploi page 11

Tip: To achieve the best result when you shave wet, lather your skin with soap
or shaving cream before you start to shave.
Caution: Never apply any creams or additives before you start to shave
under dry conditions.
Trimming the bikini line with the precision trimming head
and the 3mm or 5mm comb
To trim your bikini line, use the precision trimming head with the 3mm or
5mm comb. The resulting length is indicated on the comb.
Note: To achieve the best result, only trim your bikini line when your skin and
the appliance are dry.
1 Attach the precision trimming head onto the appliance (see chapter
'Preparing for use', section 'Attaching/detaching the precision
trimming head').
2 Attach the 3mm comb or the 5mm comb onto the precision
trimming head (see chapter 'Preparing for use', section 'Attaching/
detaching the combs').
3 Press the on/off button to switch on the appliance (Fig. 11).
4 Place the comb on the skin. To obtain an even result, make sure
that the flat part of the comb is in contact with the skin (Fig. 14).
Note: Do not use the front part of the comb (Fig. 15).
Note: Do not place the appliance on the skin too steeply.
5 Move the comb slowly against the direction of hair growth.
Note: To make trimming easier, stretch the skin with your free hand during
trimming (Fig. 16).
6 Since not all hair grows in the same direction, you need to move
the appliance in different directions (upwards, downwards and
across) (Fig. 17).
7 Regularly remove cut hair from the comb.
EnglisH
11