Philips HP6370 Mode D'emploi page 13

Never switch on the appliance while you clean it or while the cutting
unit is not attached.
Cleaning the handle and adapter
1 Clean the handle with the cleaning brush or under a running tap.
Note: Make sure that the handle is completely dry before you reassemble the
appliance.
2 If necessary, clean the adapter with the cleaning brush or a dry
cloth.
Always keep the adapter dry. Never rinse it under the tap or immerse
it in water.
Cleaning the shaving head
1 Press the on/off button to switch off the appliance (Fig. 11).
2 Pull the shaving head off the appliance (Fig. 6).
Do not exert pressure on the double shaving foil to avoid damage.
3 Push the cutting unit release slide to the right (1) and remove the
cutting unit (2) (Fig. 21).
4 Clean the cutting unit and the inside of the shaving head with the
cleaning brush. Also brush away any hairs that have collected under
the trimmer (Fig. 22).
Caution: Do not brush the foil to avoid damage to the brush or the foil.
5 You can also rinse the cutting unit and the shaving head under the
tap (Fig. 23).
6 To dry the cutting unit and the shaving head, shake them
firmly (Fig. 24).
7 Place the cutting unit back onto the shaving head ('click') (Fig. 25).
Note: Make sure that the shaving head and the cutting unit are completely
dry before you reattach them onto the appliance.
EnglisH
13