Using The Appliance - Philips HP6370 Mode D'emploi

EnglisH
10
attaching/detaching the combs
1 Attach the precision trimming head onto the appliance (see
section 'Attaching/detaching the precision trimming head' above).
2 To attach the 3mm or 5mm comb onto the precision trimming
head, place the teeth of the comb onto the teeth of the trimming
head and push down the comb ('click'). The projections on the
inside of the comb should fit exactly into the guiding grooves of the
precision trimming head (Fig. 9).
3 To detach the 3mm or 5mm comb, slide it forward with your
thumb (Fig. 10).

Using the appliance

Make sure that the appliance is fully charged before you use it for the first
time.
Note: You cannot use the Ladyshave while it is connected to the mains.
shaving
Note: When you use the appliance for shaving, you can use it under both dry
and wet conditions.
1 Press the on/off button to switch on the appliance (Fig. 11).
2 Place the double shaving foil and the integrated trimmer gently on
the skin. Stretch the skin with your free hand while you shave your
bikini line. (Fig. 12)
Note: Do not press the appliance too firmly onto the skin.
Note: When you shave the underarms, raise your arm to stretch the skin.
3 Move the appliance slowly over the skin against the direction of
hair growth while you press it lightly. Make sure that the trimmer
and the double shaving foil are always in full contact with the
skin (Fig. 13).
Note: If you move the appliance over the skin too fast, you may not obtain a
smooth result.